Having problem with SC16A... Need help!!

Autonomous Robot, Manual Robot, DC Motor Driver, Stepper Motor Driver, Servo, Multi PWM chip.....

Re: Having problem with SC16A... Need help!!

Postby hyng » Mon Apr 25, 2011 11:48 am

Hi, the maximum current for SC16A on servo power part is more than enough for 16 servo motors. I have personally tested it with 16A load continuously for half an hour and it is still working. May i know what is your application? Actually 10 servo motor not necessary to consume more than 6A. My personal thought 6A would be enough for 10 servo motor. :P

Another method that student usually do is connect a 7805 voltage regulator on EACH servo motor's power provided you use Lead Acid battery or Lithium Polymer Battery.
User avatar
hyng
Moderator
 
Posts: 292
Joined: Thu Apr 16, 2009 11:35 am

Re: Having problem with SC16A... Need help!!

Postby wgk3629 » Mon Apr 25, 2011 2:48 pm

thanks 4 the advice.well my project is similar to PR18.using 10 servo,sc16a,sk40c,pic16f877a. to compare my analysis with actual hardware and apply some control engineering methods for better control and stability.
wgk3629
Greenhorn
 
Posts: 3
Joined: Sat Apr 23, 2011 12:18 am

Previous

Return to Robot Controller

Who is online

Users browsing this forum: No registered users and 12 guests

cron