what wire is use for the RF-TX and RX at antenna pins

Bluetooth, XBee, RF......

what wire is use for the RF-TX and RX at antenna pins

Postby Kenny90 » Fri Sep 09, 2011 4:50 pm

From the RF-TX and RX manual guide, it state that using soft or hard wire at the antenna pin..What mean soft or hard wire? i'm using RF-TX and RX 315mHZ.
Kenny90
Greenhorn
 
Posts: 2
Joined: Fri Sep 09, 2011 4:36 pm

Re: what wire is use for the RF-TX and RX at antenna pins

Postby yonghui » Sun Sep 11, 2011 12:51 am

hi,


normal wire of single core can be used as simple antenna.

regards,
yh
thanks&regards,
yh
yonghui
Moderator
 
Posts: 732
Joined: Mon Sep 28, 2009 3:27 pm

Re: what wire is use for the RF-TX and RX at antenna pins

Postby shiyan » Sun Sep 11, 2011 12:25 pm

Yes, I have been using single core wire too.... I think the hard wire mean single core wire, while the soft mean multi-core wire 8-) Different people different language
User avatar
shiyan
Amateur
 
Posts: 189
Joined: Wed Jun 09, 2010 10:59 am

Re: what wire is use for the RF-TX and RX at antenna pins

Postby Kenny90 » Sun Sep 11, 2011 12:47 pm

thanks alot ..... :)
Kenny90
Greenhorn
 
Posts: 2
Joined: Fri Sep 09, 2011 4:36 pm


Return to Wireless Device

Who is online

Users browsing this forum: No registered users and 13 guests

cron