Greeting,
i'm doing simple 3 phase sine generator by using phase shifter method, but i having on problem on these situation :
1)cannot generate sine wave output(hardware) on oscilloscope(i got straight line output voltage,and miss 1 phase voltage output) as produced by the simulation software i used (Multisim 10.1), please take a look on the below picture.
2)any idea the indicator for this project,i run out of idea..because the output voltage for this project is very low(the max i could get about 3v-4v), please take a look on the circuit at the below picture
Please do not hesitate to comment and give your suggestion on this project, because i'll really appreciate it and i need to improve the project.