CONNECTION BETWEEN SMOKE DETECTOR AND PT2272

Bluetooth, XBee, RF......

CONNECTION BETWEEN SMOKE DETECTOR AND PT2272

Postby PMU.EDU.MY » Tue Jan 08, 2013 10:42 pm

i still can't make the smoke detector to send it status to PT2272. why? can anyone help me? :( :(
PMU.EDU.MY
Freshie
 
Posts: 4
Joined: Tue Jan 08, 2013 10:35 pm

Re: CONNECTION BETWEEN SMOKE DETECTOR AND PT2272

Postby shahrul » Wed Jan 09, 2013 8:13 am

PMU.EDU.MY WROTE:i still can't make the smoke detector to send it status to PT2272. why? can anyone help me? :( :(

Show your schematic and hardware.
User avatar
shahrul
Professional
 
Posts: 812
Joined: Sat May 16, 2009 9:54 pm
Location: Selangor

Re: CONNECTION BETWEEN SMOKE DETECTOR AND PT2272

Postby PMU.EDU.MY » Wed Jan 09, 2013 11:06 am

projek yang saya buat ni sama dengan PR13. tp litar dan PIC yang digunakan sy tukar. sy menggunakan PIC18F4550. bagi sedikit tunjuk ajar bekenaan dengan projek yang ingin sy buat. penambaikan ataupun ada masalah yang xdapat saya kenal pasti. sila bagi tunjuk ajar. terima kasih :)
Attachments
DSC_0035.jpg
hardware
PMU.EDU.MY
Freshie
 
Posts: 4
Joined: Tue Jan 08, 2013 10:35 pm

Re: CONNECTION BETWEEN SMOKE DETECTOR AND PT2272

Postby shahrul » Wed Jan 09, 2013 11:37 am

I never use PT2272. I just now see the schematic, the only pin PT2272 connect to PIC is ADC pin. Then you converting PIC16 to PIC18. You must get the digital i/o to function also need to get the ADC function.

Alternative, you can by pass to use PT2272 by connect directly to PIC UART ex Low Cost RF Module and RF Remote.
User avatar
shahrul
Professional
 
Posts: 812
Joined: Sat May 16, 2009 9:54 pm
Location: Selangor

Re: CONNECTION BETWEEN SMOKE DETECTOR AND PT2272

Postby PMU.EDU.MY » Wed Jan 09, 2013 11:47 am

ok. i try. so? from ur opinion sir. did this circuit is correct? i mean. about the connection? is there anything wrong?
PMU.EDU.MY
Freshie
 
Posts: 4
Joined: Tue Jan 08, 2013 10:35 pm

Re: CONNECTION BETWEEN SMOKE DETECTOR AND PT2272

Postby shahrul » Wed Jan 09, 2013 12:08 pm

PMU.EDU.MY WROTE:ok. i try. so? from ur opinion sir. did this circuit is correct? i mean. about the connection? is there anything wrong?

The hardware connection, can't check only by photo. Need to check by multimeter that the only you can do it and tell either it's right or wrong.
User avatar
shahrul
Professional
 
Posts: 812
Joined: Sat May 16, 2009 9:54 pm
Location: Selangor

Re: CONNECTION BETWEEN SMOKE DETECTOR AND PT2272

Postby PMU.EDU.MY » Wed Jan 09, 2013 12:17 pm

ok. thank you ;) how about the progrmming code? is the programming code is simple? :?
PMU.EDU.MY
Freshie
 
Posts: 4
Joined: Tue Jan 08, 2013 10:35 pm

Re: CONNECTION BETWEEN SMOKE DETECTOR AND PT2272

Postby shahrul » Wed Jan 09, 2013 12:35 pm

PMU.EDU.MY WROTE:ok. thank you ;) how about the progrmming code? is the programming code is simple? :?

For me, it's simple. If you understand, it becomes simple.
User avatar
shahrul
Professional
 
Posts: 812
Joined: Sat May 16, 2009 9:54 pm
Location: Selangor


Return to Wireless Device

Who is online

Users browsing this forum: No registered users and 12 guests