PR29

LED Blinking, Walking with Cytron Servo, Displaying RFID, Multi-function Mobile Robot......

PR29

Postby hui » Tue Feb 19, 2013 10:22 pm

Can fingerprint reader module import fingerprint image to MATLAB software?
hui
Freshie
 
Posts: 6
Joined: Tue Feb 19, 2013 9:22 pm

Re: PR29

Postby robosang » Wed Feb 20, 2013 9:00 am

Don have the hardware to verify that, but if it is UART and MATLAB can access to COM port, there should not be problem.
robosang
Expert
 
Posts: 1239
Joined: Wed Jun 10, 2009 5:37 pm

Re: PR29

Postby yonghui » Wed Feb 20, 2013 12:04 pm

Hi,
u need the image file to process by your own algorithm in Matlab?

then u will need to verify whether the module can send out the fingerprint image or not. what i know is that the module has on board dsp processor to process the images.
thanks&regards,
yh
yonghui
Moderator
 
Posts: 732
Joined: Mon Sep 28, 2009 3:27 pm

Re: PR29

Postby hui » Thu Mar 14, 2013 10:22 pm

is it possible the PR29 act as standalone project by edit the code in mplab?
my project is about simple security system, just display door open for certain person and invalid for other.
hui
Freshie
 
Posts: 6
Joined: Tue Feb 19, 2013 9:22 pm

Re: PR29

Postby hyng » Fri Mar 15, 2013 11:15 am

hui WROTE:is it possible the PR29 act as standalone project by edit the code in mplab?
my project is about simple security system, just display door open for certain person and invalid for other.

PR29 is a standalone project. Yes, you can do it by editing the sample code.
For door security, you may also refer to PR25.
User avatar
hyng
Moderator
 
Posts: 292
Joined: Thu Apr 16, 2009 11:35 am

Re: PR29

Postby hui » Sat Mar 16, 2013 9:31 pm

i had tried source code given by cytron. When i build it in mplab, it stated build failed. So what should i need to do to get build successful? i know cytron had provided the hex file but i want to try to build it in mplab by myself.
hui
Freshie
 
Posts: 6
Joined: Tue Feb 19, 2013 9:22 pm

Re: PR29

Postby robosang » Sat Mar 16, 2013 10:12 pm

what is the error oh....
robosang
Expert
 
Posts: 1239
Joined: Wed Jun 10, 2009 5:37 pm

Re: PR29

Postby hui » Sat Mar 16, 2013 11:23 pm

Clean: Deleting intermediary and output files.
Clean: Deleted file "C:\Users\Desktop\1.mcs".
Clean: Done.
Executing: "C:\Program Files\PICC\Ccsc.exe" +FM "hardware psm\PR29 MPLABX\PR29 MPLABX\PR29.c" +DF +LN +T +A +M +Z +Y=9 +EA
BUILD FAILED: Sat Mar 16 23:20:44 2013


if use PIC C Compiler, got 5 errors.
hui
Freshie
 
Posts: 6
Joined: Tue Feb 19, 2013 9:22 pm

Re: PR29

Postby robosang » Sun Mar 17, 2013 8:29 am

It will be good if you can printscreen the output window of MPLAB IDE and share it here.
robosang
Expert
 
Posts: 1239
Joined: Wed Jun 10, 2009 5:37 pm

Re: PR29

Postby hui » Sun Mar 17, 2013 9:10 am

here the pic compiler
piccompiler.png


the mplab
mplab.png
hui
Freshie
 
Posts: 6
Joined: Tue Feb 19, 2013 9:22 pm

Next

Return to DIY Project Set

Who is online

Users browsing this forum: No registered users and 15 guests

cron