Need help on DIY circuit

LED Blinking, Walking with Cytron Servo, Displaying RFID, Multi-function Mobile Robot......

Need help on DIY circuit

Postby M Fitri » Mon Jul 22, 2013 2:49 am

Hi guys. I`ve been studying from PR 24 DIY circuit, and was wondering whether you can change the order of the two boxes below. Since from my point of view, i think it might not hurt if we put them in the wrong order, but i was curious of why does they put it in such order for the sensor and the v.resistor shows in the picture. Please help. Thanks in advanced

Image
M Fitri
Freshie
 
Posts: 7
Joined: Mon Jul 22, 2013 2:36 am

Re: Need help on DIY circuit

Postby robosang » Mon Jul 22, 2013 7:48 am

Not sure which project you referring to, but there are many ways to draw schematic :mrgreen:
robosang
Expert
 
Posts: 1239
Joined: Wed Jun 10, 2009 5:37 pm

Re: Need help on DIY circuit

Postby M Fitri » Mon Jul 22, 2013 7:03 pm

Oh my bad, it was actually PR 23, from here : http://www.cytron.com.my/viewProduct.php?pid=HiUfHBYMLSEqOzYhOCADPbr88qhInvC3IN/NjoX6QZU=&store=

Let just assume that i followed exactly like the schematic in my circuit for the above circuit, but i put the S1 > S4 and VR1 > VR4 (in the both red and blue boxes) in random. Would that be okay or it would affect the circuit? Sorry that i`m still new in reading circuit.
M Fitri
Freshie
 
Posts: 7
Joined: Mon Jul 22, 2013 2:36 am

Re: Need help on DIY circuit

Postby M Fitri » Wed Jul 24, 2013 6:18 pm

Anyone?
M Fitri
Freshie
 
Posts: 7
Joined: Mon Jul 22, 2013 2:36 am

Re: Need help on DIY circuit

Postby robosang » Thu Jul 25, 2013 9:57 pm

What do you mean by S1 > S4? in random? Give a specific example.

Do you mean you replace S1 with S4 and vise versa?
robosang
Expert
 
Posts: 1239
Joined: Wed Jun 10, 2009 5:37 pm

Re: Need help on DIY circuit

Postby M Fitri » Fri Jul 26, 2013 6:53 am

robosang WROTE:What do you mean by S1 > S4? in random? Give a specific example.

Do you mean you replace S1 with S4 and vise versa?


Yes, sorry i didn`t make it clearer in my previous post. Same goes to the order of VR1 until VR4
M Fitri
Freshie
 
Posts: 7
Joined: Mon Jul 22, 2013 2:36 am

Re: Need help on DIY circuit

Postby robosang » Sun Jul 28, 2013 9:18 pm

Yes, of course the sequence is important because the output of comparator will be connected to the microcontroller which read the sensor.
robosang
Expert
 
Posts: 1239
Joined: Wed Jun 10, 2009 5:37 pm

Re: Need help on DIY circuit

Postby M Fitri » Mon Jul 29, 2013 6:51 pm

Thanks, i need that :)
M Fitri
Freshie
 
Posts: 7
Joined: Mon Jul 22, 2013 2:36 am


Return to DIY Project Set

Who is online

Users browsing this forum: No registered users and 19 guests

cron