Siemens TC35 development board setup

Bluetooth, XBee, RF......

Re: Siemens TC35 development board setup

Postby kl84 » Wed May 28, 2014 5:47 pm

A photo of your board n connection will help.
User avatar
kl84
Amateur
 
Posts: 166
Joined: Thu Jul 08, 2010 12:14 pm

Re: Siemens TC35 development board setup

Postby karthi06 » Wed May 28, 2014 8:13 pm

This is how my circuit looks like.
Attachments
project circuit (3).rar
(33.32 KiB) Downloaded 102 times
karthi06
Novice
 
Posts: 17
Joined: Mon Feb 24, 2014 8:47 pm

Re: Siemens TC35 development board setup

Postby karthi06 » Thu May 29, 2014 9:31 am

I measured the voltage at VCC at UART port and it shows 1.76V qhile plugged on to adapter.Is it suppose show like that ?
karthi06
Novice
 
Posts: 17
Joined: Mon Feb 24, 2014 8:47 pm

Re: Siemens TC35 development board setup

Postby sich » Thu May 29, 2014 2:39 pm

Seems like you have attached uncommon file type. Possible to just show us jpeg file?
~> How to ask QUESTIONS the SMART way in FORUM? <~
User avatar
sich
Moderator
 
Posts: 603
Joined: Tue Apr 21, 2009 2:15 pm

Re: Siemens TC35 development board setup

Postby karthi06 » Thu May 29, 2014 5:01 pm

Will this do ?
Attachments
circuit.jpg
karthi06
Novice
 
Posts: 17
Joined: Mon Feb 24, 2014 8:47 pm

Re: Siemens TC35 development board setup

Postby sich » Thu May 29, 2014 7:57 pm

You diagram shows that you are connecting the UART pins of your PIC to the DB9 connector on TC35 directly :!: Please refer to this diagram (for Ver2.0) as seen in TC35's user manual page 13.
PIC-TC35.jpg
~> How to ask QUESTIONS the SMART way in FORUM? <~
User avatar
sich
Moderator
 
Posts: 603
Joined: Tue Apr 21, 2009 2:15 pm

Re: Siemens TC35 development board setup

Postby karthi06 » Fri May 30, 2014 1:15 am

That is for simulation purpose only.In hardware, i connected exactly as the manual has been written.

Thank you.
karthi06
Novice
 
Posts: 17
Joined: Mon Feb 24, 2014 8:47 pm

Re: Siemens TC35 development board setup

Postby ober » Fri May 30, 2014 8:49 am

Please provide the actual hardware wiring picture. Most of people will say they follow exactly, but some time it is not the case.
Ober Choo
Cytron Technologies Sdn Bhd
www.cytron.com.my
User avatar
ober
Moderator
 
Posts: 1441
Joined: Wed Apr 15, 2009 1:03 pm

Re: Siemens TC35 development board setup

Postby Manuel » Mon Jun 16, 2014 12:14 pm

Hey there! Greetings from Argentina.
Well, I have been having some troubles while setting up my development board, when I insert the SIM card, the board doeoes not recognize it, I mean the yellow lead doesn't stay off for 3 seconds like It's said in the user manual, so what I'm doing wrong? Is there a problem with my board?.

Thanks again, look forward to your reply! :D
Manuel
Fledgling
 
Posts: 1
Joined: Mon Jun 16, 2014 12:07 pm

Re: Siemens TC35 development board setup

Postby ober » Mon Jun 16, 2014 9:07 pm

Do check if the SIM has credit and it is not PIN protected. It can be the SIM card holder is not clamping it firmly, do check that too.
Ober Choo
Cytron Technologies Sdn Bhd
www.cytron.com.my
User avatar
ober
Moderator
 
Posts: 1441
Joined: Wed Apr 15, 2009 1:03 pm

PreviousNext

Return to Wireless Device

Who is online

Users browsing this forum: No registered users and 3 guests

cron