Combat Robot Controller-Arduino Compatib

Autonomous Robot, Manual Robot, DC Motor Driver, Stepper Motor Driver, Servo, Multi PWM chip.....

Combat Robot Controller-Arduino Compatib

Postby ArthurWong » Thu Nov 01, 2018 11:17 am

i bought this board this recently (Product Code: URC10), the problem that i face was i cant upload the program after few times upload program. It just state "Uploading" then cant upload the program until now, may i know is there any solution for it?
ArthurWong
Newbie
 
Posts: 8
Joined: Wed Nov 29, 2017 12:39 pm

Re: Combat Robot Controller-Arduino Compatib

Postby Idris » Thu Nov 01, 2018 4:16 pm

Hi ArthurWong,

Did the problem happened on the first time of usage? Could you share a few clear photos/video on your hardware setup?

Thanks.
Cytron Technologies invest time and resources providing tutorial, training and support for STEM education and maker movement. We need your support by purchasing products from Cytron Technologies. Thanks.
http://www.cytron.com.my
User avatar
Idris
Moderator
 
Posts: 384
Joined: Thu Mar 22, 2012 5:28 pm
Location: Pulau Pinang

Re: Combat Robot Controller-Arduino Compatib

Postby ArthurWong » Fri Nov 02, 2018 8:26 am

after few times of usage, i just test the board with the sensor to test functionality, after few times upload program it become "uploading"
ArthurWong
Newbie
 
Posts: 8
Joined: Wed Nov 29, 2017 12:39 pm

Re: Combat Robot Controller-Arduino Compatib

Postby ArthurWong » Sat Nov 03, 2018 12:28 am

may i know what can i do with the board? any solution that i can test or use?
ArthurWong
Newbie
 
Posts: 8
Joined: Wed Nov 29, 2017 12:39 pm

Re: Combat Robot Controller-Arduino Compatib

Postby ober » Sat Nov 03, 2018 5:13 am

Mind sharing the hardware setup?

I would suggest to unplug everything on the board and test loading program again.
Ober Choo
Cytron Technologies Sdn Bhd
www.cytron.com.my
User avatar
ober
Moderator
 
Posts: 1442
Joined: Wed Apr 15, 2009 1:03 pm

Re: Combat Robot Controller-Arduino Compatib

Postby ArthurWong » Tue Nov 06, 2018 6:21 pm

ya, that is what i had done, but unfortunately still same, 2 boards gave such problem
ArthurWong
Newbie
 
Posts: 8
Joined: Wed Nov 29, 2017 12:39 pm

Re: Combat Robot Controller-Arduino Compatib

Postby ArthurWong » Wed Nov 07, 2018 10:41 pm

So, may i know is there anything i can do to save the board and need to send back to cytron?
ArthurWong
Newbie
 
Posts: 8
Joined: Wed Nov 29, 2017 12:39 pm

Re: Combat Robot Controller-Arduino Compatib

Postby ober » Thu Nov 08, 2018 11:28 am

Yes, please contact support@cytron.io, our engineers will assist you for warranty.
Ober Choo
Cytron Technologies Sdn Bhd
www.cytron.com.my
User avatar
ober
Moderator
 
Posts: 1442
Joined: Wed Apr 15, 2009 1:03 pm

Re: Combat Robot Controller-Arduino Compatib

Postby ArthurWong » Thu Nov 08, 2018 12:58 pm

TQ very much
ArthurWong
Newbie
 
Posts: 8
Joined: Wed Nov 29, 2017 12:39 pm


Return to Robot Controller

Who is online

Users browsing this forum: No registered users and 1 guest

cron